PLANK AND FLAT PANEL DOORS:

Plank and Flat Panel Designs may be specified for either Interior or Exterior application. The difference in construction between Interior and Exterior Doors is the thickness of the Plank or Flat Panels panels.

Plank and Flat Panel Interior Doors: Our Plank and Flat Panel Interior door designs are constructed with 1-3/4” stiles and rails and with recessed 3⁄4” thick tongue and groove Plank Panels or 3⁄4” Flat Panels. These doors are intended solely for Interior use due to the 3⁄4” thick panel. Interior doors with 3⁄4” thick panels that are used in an Exterior application are not covered by warranty.

Interior Doors: 1-3/4” vs. 1-3/8” thickness: All of our doors are priced at 1-3/4” thickness unless specified otherwise. Most of our designs may be built in 1-3/8” thickness, (for example, when used as pocket doors or bi-fold units) however, there is no cost savings for the 1-3/8” thick doors. Our Interior doors are typically designed at 1-3/4” thickness for the added stability inherent in using thicker materials.

Interior Plank Door




Interior Flat Panel Door





Plank Panel Exterior Doors: For Exterior applications our Plank Panel designs may be selected with tongue and groove plank panels that are either slightly recessed or the full thickness of the door.

Exterior Plank Panel Doors with Recessed Planks The recessed panels are 1-1/2” thick for 1-3/4” doors or 1-3/4” thick for 2-1/4” thick doors.

Flat Panel Exterior Doors: For Exterior applications for designs that feature a flat panel are typically constructed with a simple square edged raised panel showing a minimal 1⁄4” reveal.





Exterior Plank Panel Doors with Full Thick Planks: feature tongue and groove planks that are the full thickness of the stiles and rails typically 1-3/4” or 2-1/4” thickness. The full thick plank provides the esthetic of traditional Plank Style doors with the stability of Stile and Rail construction methods.