Spanish Pueblo Doors Finest Handcrafted Doors Since 1952
Showroom
Installations
Technical Specifics
Door Options
Pre-hanging
Our Company
Contact Us
View Catalogue
FAQ
Home
Search
Pre-Hanging

The beauty of a door...

ORDERING A PRE-HUNG DOOR

Pre-hung Unit Specifications:
When ordering a door pre-hung, you must provide the following information:

  1. Door Size: Width x Height x Thickness
  2. Interior or Exterior jamb: with weather-strip requirements for Exterior
  3. Non Standard uses: Pocket doors, 4 leaf or 2 leaf bi-folds units, Bi-pass Units, Dutch Doors may be specified when applicable.
  4. Door Jamb Wood Type: Knotty Pine, Knotty Alder, Select Alder, etc.
  5. Door Jamb Texture: Smooth Sanded vs. Antique Distressed, etc. Texture will typically match the door; however it can vary, for example in cases where a textured door may be hung in a sanded jamb.
  6. Jamb Size - Width and Thickness: What is the jamb width required for the application? Typical sizes are 3-1/2” to 4-5/8” for interior doors and 5-1/2” to 6-5/8” for Exterior doors, etc. Typical thickness is 1-1/4 “ for standard Interior and Exterior units, however Arch Top Doors and oversized doors require a thicker jamb.
  7. Door Swing or Active Swing on pairs: You must specify either Right Hand or Left Hand swing on single doors and Right hand active or Left Hand Active on pairs with a fixed door
  8. Hinge finish: Since we provide the Hinges to match your hardware, what hinge finish is specified to match the door hardware. The most common hinge finishes are Satin Brass, Black, Antique Nickel, Oil Rubbed Bronze, and Satin Nickle.
  9. Arch Top Jambs - Full Arch Top or Flat Arch Top: You may specify Arch Top Units for Interior or Exterior use. If Flat Arch Top Units have specific springline dimensions requirements, they must be specified when ordering.
  10. Confirm Rough Openings: It is highly recommended that the rough opening dimensions for all prehung units be confirmed. Although our doors generally do fit into standard rough openings, there can be a wide variance in how rough openings are sized at the job site. In particular, with Arch Top Units and Custom Entry Units it is required that the rough opening be confirmed or we will provide required RO’s if necessary.
  11. Jamb Finish: Is the door going to be pre-finished by Spanish Pueblo Doors or is it unfinished? If the order is pre-finished what is the finish color selected.


 
505.473.0464 support@spdoors.com 1091-B Siler Rd. Santa Fe, New Mexico 87504-2517
© 2005-2008 Spanish Pueblo Doors All rights strictly reserved. No content from this website, including images, may be used without the written permission of Spanish Pueblo Doors.

SHOWROOM | INSTALLATIONS | Technical Specifics | Door Options | Pre-hanging | Our Company | Contact Us | View Catalogue | Home